en-us	{ $amount } taps
en	{ $amount } taps

en-us	{ $amount } trackers
en	{ $amount } trackers

en-us	{ $amount } trackers connected
en	{ $amount } trackers connected

en-us	{ $assigned } of { $trackers } trackers assigned
en	{ $assigned } of { $trackers } trackers assigned

en-us	{ $time } seconds left
en	{ $time } seconds left

en-us	1. Place a body part sticker (if you have one) on the tracker according to your choosing
en	1. Place a body part sticker (if you have one) on the tracker according to your choosing

en-us	1. Squat in a "skiing" pose with your legs bent, your upper body tilted forwards, and your arms bent.
en	1. Squat in a "skiing" pose with your legs bent, your upper body tilted forwards, and your arms bent.

en-us	1. Stand upright with your arms to your sides.
en	1. Stand upright with your arms to your sides.

en-us	2. Attach the strap to your tracker, keeping the hook and loop side of the strap face in the following orientation:
en	2. Attach the strap to your tracker, keeping the hook and loop side of the strap face in the following orientation:

en-us	2. Attach the strap to your tracker, keeping the velcro side of the strap facing the same direction as the slime face of your tracker:
en	2. Attach the strap to your tracker, keeping the velcro side of the strap facing the same direction as the slime face of your tracker:

en-us	2. Press the "Full Reset" button and wait for 3 seconds before the trackers will reset.
en	2. Press the "Full Reset" button and wait for 3 seconds before the trackers will reset.

en-us	2. Press the "Reset Mounting" button and wait for 3 seconds before the trackers' mounting orientations will reset.
en	2. Press the "Reset Mounting" button and wait for 3 seconds before the trackers' mounting orientations will reset.

en-us	Accel. X/Y/Z
en	Accel. X/Y/Z

en-us	Adjust by ratio groups
en	Adjust by ratio groups

en-us	Allow drift compensation
en	Allow drift compensation

en-us	Allow drift compensation
en	Allow drift compensation

en-us	Allows for resets to be triggered by tapping a tracker. The tracker highest up on your torso is used for Yaw Reset, the tracker highest up on your left leg is used for Full Reset, and the tracker highest up on your right leg is used for Mounting Reset. Taps must occur within the time limit of 0.3 seconds times the number of taps to be recognized.
en	Allows for resets to be triggered by tapping a tracker. The tracker highest up on your torso is used for Yaw Reset, the tracker highest up on your left leg is used for Full Reset, and the tracker highest up on your right leg is used for Mounting Reset. Taps must occur within the time limit of 0.3 seconds times the number of taps to be recognized.

en-us	Amount
en	Amount

en-us	Anchor at hips
en	Anchor at hips

en-us	Anchor at hips
en	Anchor at hips

en-us	Anchor the tracking at the hips, useful for seated VTubing. If disabling, load a VRM model.
en	Anchor the tracking at the hips, useful for seated VTubing. If disabling, load a VRM model.

en-us	And HMD height is
en	And HMD height is

en-us	A new tracker was found!
en	A new tracker was found!

en-us	Appearance
en	Appearance

en-us	Appearance
en	Appearance

en-us	Are you sure you want to do the automatic mounting calibration?
en	Are you sure you want to do the automatic mounting calibration?

en-us	Arm length
en	Arm length

en-us	Arm tracking
en	Arm tracking

en-us	Assigned Trackers
en	Assigned Trackers

en-us	Assignment
en	Assignment

en-us	Assign trackers
en	Assign trackers

en-us	Auto
en	Auto

en-us	Automatically handles toggling SteamVR trackers on or off depending on your current tracker assignments
en	Automatically handles toggling SteamVR trackers on or off depending on your current tracker assignments

en-us	Automatic mounting
en	Automatic mounting

en-us	Automatic mounting
en	Automatic mounting

en-us	Automatic proportions
en	Automatic proportions

en-us	Automatic proportions
en	Automatic proportions

en-us	Automatic tracker assignment
en	Automatic tracker assignment

en-us	Automatic tracker assignment
en	Automatic tracker assignment

en-us	Average the hip's yaw and roll with the legs'
en	Average the hip's yaw and roll with the legs'

en-us	Average the knees' yaw and roll with the ankles'
en	Average the knees' yaw and roll with the ankles'

en-us	Average the knee trackers' yaw and roll with the ankles'
en	Average the knee trackers' yaw and roll with the ankles'

en-us	Back
en	Back

en-us	Back
en	Back

en-us	Back-Left
en	Back-Left

en-us	Back-Right
en	Back-Right

en-us	Base font scaling
en	Base font scaling

en-us	Battery
en	Battery

en-us	Bend knees a few times.
en	Bend knees a few times.

en-us	Body measured and saved.
en	Body measured and saved.

en-us	Body Proportions
en	Body Proportions

en-us	Body proportions are used to know the measurements of your body. They're required to calculate the trackers' positions. When proportions of your body don't match the ones saved, your tracking precision will be worse and you will notice things like skating or sliding, or your body not matching your avatar well.
en	Body proportions are used to know the measurements of your body. They're required to calculate the trackers' positions. When proportions of your body don't match the ones saved, your tracking precision will be worse and you will notice things like skating or sliding, or your body not matching your avatar well.

en-us	Body proportions are used to know the measurements of your body. They're required to calculate the trackers' positions. When proportions of your body don't match the ones saved, your tracking precision will be worse and you will notice things like skating or sliding, or your body not matching your avatar well. <b>You only need to measure your body once!</b> Unless they are wrong or your body has changed, then you don't need to do them again.
en	Body proportions are used to know the measurements of your body. They're required to calculate the trackers' positions. When proportions of your body don't match the ones saved, your tracking precision will be worse and you will notice things like skating or sliding, or your body not matching your avatar well. <b>You only need to measure your body once!</b> Unless they are wrong or your body has changed, then you don't need to do them again.

en-us	Body proportions file
en	Body proportions file

en-us	Bringing full-body tracking to everyone
en	Bringing full-body tracking to everyone

en-us	<b>The manual mounting calibration is recommended for new users</b>, as the automatic mounting calibration's poses can be hard to get right first and may require some practice.
en	<b>The manual mounting calibration is recommended for new users</b>, as the automatic mounting calibration's poses can be hard to get right first and may require some practice.

en-us	Busy
en	Busy

en-us	<b>Warning:</b> A neck tracker can be deadly if adjusted too tightly, the strap could cut the circulation to your head!
en	<b>Warning:</b> A neck tracker can be deadly if adjusted too tightly, the strap could cut the circulation to your head!

en-us	<b>Warning:</b> An error was found while estimating proportions! Please <docs>check the docs</docs> or join our <discord>Discord</discord> for help ^_^
en	<b>Warning:</b> An error was found while estimating proportions! Please <docs>check the docs</docs> or join our <discord>Discord</discord> for help ^_^

en-us	<b>Warning:</b> hand trackers will override your controllers. Are you sure?
en	<b>Warning:</b> hand trackers will override your controllers. Are you sure?

en-us	<b>Warning:</b> The initial setup is required for good tracking, it is needed if this is your first time using SlimeVR.
en	<b>Warning:</b> The initial setup is required for good tracking, it is needed if this is your first time using SlimeVR.

en-us	<b>Warning:</b> This will reset the tracker to factory settings. Which means Wi-Fi and calibration settings <b>will all be lost!</b>
en	<b>Warning:</b> This will reset the tracker to factory settings. Which means Wi-Fi and calibration settings <b>will all be lost!</b>

en-us	Calibrating
en	Calibrating

en-us	Cancel
en	Cancel

en-us	Cancel
en	Cancel

en-us	Cancel
en	Cancel

en-us	Cancel
en	Cancel

en-us	Cancel
en	Cancel

en-us	Change settings specific to the VMC (Virtual Motion Capture) protocol     to send SlimeVR's bone data and receive bone data from other apps.
en	Change settings specific to the VMC (Virtual Motion Capture) protocol     to send SlimeVR's bone data and receive bone data from other apps.

en-us	Change the default language you want to use.
en	Change the default language you want to use.

en-us	Change the values of skeleton settings. You may need to adjust your proportions after changing these.
en	Change the values of skeleton settings. You may need to adjust your proportions after changing these.

en-us	Change VRChat-specific settings to receive headset (HMD) data and send tracker data for FBT without SteamVR (ex. Quest standalone).
en	Change VRChat-specific settings to receive headset (HMD) data and send tracker data for FBT without SteamVR (ex. Quest standalone).

en-us	Change which arm pose is expected for mounting reset.
en	Change which arm pose is expected for mounting reset.

en-us	Check the results below, do they look correct?
en	Check the results below, do they look correct?

en-us	Check your height
en	Check your height

en-us	Chest
en	Chest

en-us	Chest
en	Chest

en-us	Chest
en	Chest

en-us	Chest Length
en	Chest Length

en-us	Chest Offset
en	Chest Offset

en-us	Choose a location where you want this tracker to be assigned. Alternatively you can choose to manage all trackers at once instead of one by one.
en	Choose a location where you want this tracker to be assigned. Alternatively you can choose to manage all trackers at once instead of one by one.

en-us	Choose the filtering type for your trackers. Prediction predicts movement while smoothing smoothens movement.
en	Choose the filtering type for your trackers. Prediction predicts movement while smoothing smoothens movement.

en-us	Choose which address to send out data at via VMC.
en	Choose which address to send out data at via VMC.

en-us	Choose which address to send out data to VRChat (check your Wi-Fi settings on your device).
en	Choose which address to send out data to VRChat (check your Wi-Fi settings on your device).

en-us	Clear drift compensation
en	Clear drift compensation

en-us	Clear reset mounting
en	Clear reset mounting

en-us	Clicking "{ version_update-update }" will download the SlimeVR installer for you.
en	Clicking "{ version_update-update }" will download the SlimeVR installer for you.

en-us	Click on every tracker and select which way they are mounted
en	Click on every tracker and select which way they are mounted

en-us	Close
en	Close

en-us	Close
en	Close

en-us	Close
en	Close

en-us	Close setup
en	Close setup

en-us	Color theme
en	Color theme

en-us	Compensates IMU yaw drift by applying an inverse rotation. Change amount of compensation and up to how many resets are taken into account.
en	Compensates IMU yaw drift by applying an inverse rotation. Change amount of compensation and up to how many resets are taken into account.

en-us	Compensation amount
en	Compensation amount

en-us	Connect each tracker one at a time through a USB port.
en	Connect each tracker one at a time through a USB port.

en-us	Connected to the Server
en	Connected to the Server

en-us	Connected to the Server
en	Connected to the Server

en-us	Connected to Wi-Fi
en	Connected to Wi-Fi

en-us	Connected trackers warning
en	Connected trackers warning

en-us	Connected trackers warning on exit
en	Connected trackers warning on exit

en-us	Connecting to serial device
en	Connecting to serial device

en-us	Connecting to the server
en	Connecting to the server

en-us	Connection lost to the server. Trying to reconnect...
en	Connection lost to the server. Trying to reconnect...

en-us	Connection to serial lost, Reconnecting...
en	Connection to serial lost, Reconnecting...

en-us	Connect to Wi-Fi
en	Connect to Wi-Fi

en-us	Connect trackers
en	Connect trackers

en-us	Continue
en	Continue

en-us	Continue setup
en	Continue setup

en-us	Controller Distance Y
en	Controller Distance Y

en-us	Controller Distance Z
en	Controller Distance Z

en-us	Could not find the server
en	Could not find the server

en-us	Currently not connected to SteamVR via the SlimeVR driver.
en	Currently not connected to SteamVR via the SlimeVR driver.

en-us	Custom
en	Custom

en-us	Custom Name
en	Custom Name

en-us	Default font
en	Default font

en-us	Default font
en	Default font

en-us	Developer Mode
en	Developer Mode

en-us	Developer Mode
en	Developer Mode

en-us	Developer Mode
en	Developer Mode

en-us	Disconnected
en	Disconnected

en-us	Display Name
en	Display Name

en-us	Display Overlay as Mirror
en	Display Overlay as Mirror

en-us	Drag & drop a model to use, or <u>browse</u>
en	Drag & drop a model to use, or <u>browse</u>

en-us	Drag & drop files to use, or <u>browse</u>.
en	Drag & drop files to use, or <u>browse</u>.

en-us	Drift compensation
en	Drift compensation

en-us	Drift compensation
en	Drift compensation

en-us	Edit assignment
en	Edit assignment

en-us	Edit mounting
en	Edit mounting

en-us	Elbow Offset
en	Elbow Offset

en-us	Elbows
en	Elbows

en-us	Elbows
en	Elbows

en-us	Emulate the waist tracker problems that Vive trackers have. This is a joke and makes tracking worse.
en	Emulate the waist tracker problems that Vive trackers have. This is a joke and makes tracking worse.

en-us	Enable
en	Enable

en-us	Enable
en	Enable

en-us	Enable
en	Enable

en-us	Enable
en	Enable

en-us	Enable
en	Enable

en-us	Enable
en	Enable

en-us	Enable feet Mounting Reset by tiptoeing.
en	Enable feet Mounting Reset by tiptoeing.

en-us	Enable or disable specific SteamVR trackers. Useful for games or apps that only support certain trackers.
en	Enable or disable specific SteamVR trackers. Useful for games or apps that only support certain trackers.

en-us	Enable tap to full reset
en	Enable tap to full reset

en-us	Enable tap to quick reset
en	Enable tap to quick reset

en-us	Enable tap to reset
en	Enable tap to reset

en-us	Enable tap to reset mounting
en	Enable tap to reset mounting

en-us	Enable tap to yaw reset
en	Enable tap to yaw reset

en-us	Enable Vive emulation
en	Enable Vive emulation

en-us	Enjoy your full-body experience
en	Enjoy your full-body experience

en-us	Ensure your heels do not move during recording!
en	Ensure your heels do not move during recording!

en-us	Enter your Wi-Fi credentials!
en	Enter your Wi-Fi credentials!

en-us	Error
en	Error

en-us	Every time you turn on your trackers, they need to rest for a moment on a flat surface to calibrate. Let's do the same thing by clicking the "{ onboarding-calibration_tutorial-calibrate }" button, <b>do not move them!</b>
en	Every time you turn on your trackers, they need to rest for a moment on a flat surface to calibrate. Let's do the same thing by clicking the "{ onboarding-calibration_tutorial-calibrate }" button, <b>do not move them!</b>

en-us	Exit on close
en	Exit on close

en-us	Exit SlimeVR
en	Exit SlimeVR

en-us	Expects your arms to be 90 degrees up to the sides during Full Reset, and down on the sides during Mounting Reset.
en	Expects your arms to be 90 degrees up to the sides during Full Reset, and down on the sides during Mounting Reset.

en-us	Expects your arms to be down on the sides during Full Reset, and 90 degrees up to the sides during Mounting Reset.
en	Expects your arms to be down on the sides during Full Reset, and 90 degrees up to the sides during Mounting Reset.

en-us	Expects your arms to be up 90 degrees forward. Useful for VTubing.
en	Expects your arms to be up 90 degrees forward. Useful for VTubing.

en-us	Experimental
en	Experimental

en-us	Experimental
en	Experimental

en-us	Export proportions
en	Export proportions

en-us	Export proportions
en	Export proportions

en-us	Extended knee
en	Extended knee

en-us	Extended knee model
en	Extended knee model

en-us	Extended pelvis
en	Extended pelvis

en-us	Extended pelvis model
en	Extended pelvis model

en-us	Extended spine
en	Extended spine

en-us	Extended spine model
en	Extended spine model

en-us	Factory Reset
en	Factory Reset

en-us	Failed
en	Failed

en-us	Failed to initialize WebGL.
en	Failed to initialize WebGL.

en-us	Fast data feed
en	Fast data feed

en-us	Feedback sound
en	Feedback sound

en-us	Feedback sound
en	Feedback sound

en-us	Feedback sound volume
en	Feedback sound volume

en-us	Feet
en	Feet

en-us	Feet
en	Feet

en-us	Feet Mounting Reset
en	Feet Mounting Reset

en-us	Filtering
en	Filtering

en-us	Filtering type
en	Filtering type

en-us	Filter Slimes and HMD
en	Filter Slimes and HMD

en-us	Firmware Version
en	Firmware Version

en-us	Floor clip
en	Floor clip

en-us	Floor-clip can Reduce or even eliminates clipping through the floor. When enabling this, make sure to full reset and recalibrate in game.
en	Floor-clip can Reduce or even eliminates clipping through the floor. When enabling this, make sure to full reset and recalibrate in game.

en-us	Floor-clip can Reduce or even eliminates clipping with the floor but may cause problems when on your knees. Skating-correction corrects for ice skating, but can decrease accuracy in certain movement patterns.
en	Floor-clip can Reduce or even eliminates clipping with the floor but may cause problems when on your knees. Skating-correction corrects for ice skating, but can decrease accuracy in certain movement patterns.

en-us	Foot Length
en	Foot Length

en-us	Foot plant
en	Foot plant

en-us	Foot-plant rotates your feet to be parallel to the ground when in contact.
en	Foot-plant rotates your feet to be parallel to the ground when in contact.

en-us	Foot Shift
en	Foot Shift

en-us	Force arms from HMD
en	Force arms from HMD

en-us	Force arms to be tracked from the headset (HMD) even if positional hand data is available.
en	Force arms to be tracked from the headset (HMD) even if positional hand data is available.

en-us	Forget tracker
en	Forget tracker

en-us	Forget tracker
en	Forget tracker

en-us	For SlimeVR trackers to work, we need to assign a mounting orientation to your trackers to align them with your physical tracker mounting.
en	For SlimeVR trackers to work, we need to assign a mounting orientation to your trackers to align them with your physical tracker mounting.

en-us	For SlimeVR trackers to work, we need to know the length of your bones. This short calibration will measure it for you.
en	For SlimeVR trackers to work, we need to know the length of your bones. This short calibration will measure it for you.

en-us	For small touches
en	For small touches

en-us	Forward
en	Forward

en-us	Forward OSC messages from another program. Useful for using another OSC program with VRChat for example.
en	Forward OSC messages from another program. Useful for using another OSC program with VRChat for example.

en-us	Front
en	Front

en-us	Front-Left
en	Front-Left

en-us	Front-Right
en	Front-Right

en-us	Full Reset
en	Full Reset

en-us	Full reset delay
en	Full reset delay

en-us	General
en	General

en-us	Gesture control
en	Gesture control

en-us	Gesture control
en	Gesture control

en-us	Get Infos
en	Get Infos

en-us	Get ready to move
en	Get ready to move

en-us	Get WiFi Scan
en	Get WiFi Scan

en-us	Give it a cute nickname :)
en	Give it a cute nickname :)

en-us	Go Back to Enter VR
en	Go Back to Enter VR

en-us	Go Back to Enter VR
en	Go Back to Enter VR

en-us	Go Back to introduction
en	Go Back to introduction

en-us	Go Back to Mounting calibration
en	Go Back to Mounting calibration

en-us	Go Back to Reset tutorial
en	Go Back to Reset tutorial

en-us	Go Back to Reset tutorial
en	Go Back to Reset tutorial

en-us	Go Back to Tracker assignent
en	Go Back to Tracker assignent

en-us	Go back to trackers list
en	Go back to trackers list

en-us	Go Back to Wi-Fi credentials
en	Go Back to Wi-Fi credentials

en-us	Go Back to Wi-Fi Credentials
en	Go Back to Wi-Fi Credentials

en-us	GUI font
en	GUI font

en-us	Hand Distance Y
en	Hand Distance Y

en-us	Hand Distance Z
en	Hand Distance Z

en-us	Hands
en	Hands

en-us	Hardware ID
en	Hardware ID

en-us	Hardware Revision
en	Hardware Revision

en-us	Head
en	Head

en-us	Head Shift
en	Head Shift

en-us	Hide
en	Hide

en-us	Hide
en	Hide

en-us	Hide
en	Hide

en-us	High contrast
en	High contrast

en-us	Hip
en	Hip

en-us	Hip
en	Hip

en-us	Hip is assigned but you need Unknown unassigned body part to also be assigned!
en	Hip is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Hip Length
en	Hip Length

en-us	Hip Offset
en	Hip Offset

en-us	Hips Width
en	Hips Width

en-us	Hold on...
en	Hold on...

en-us	Home
en	Home

en-us	How to prepare a Slime Tracker before putting it on
en	How to prepare a Slime Tracker before putting it on

en-us	I am in front of a chair
en	I am in front of a chair

en-us	I assigned all the trackers
en	I assigned all the trackers

en-us	I connected all my trackers
en	I connected all my trackers

en-us	If you are using a standalone VR headset, make sure to have your guardian / boundary turned on so that your height is correct!
en	If you are using a standalone VR headset, make sure to have your guardian / boundary turned on so that your height is correct!

en-us	Ignore it
en	Ignore it

en-us	I have all my trackers on
en	I have all my trackers on

en-us	I have all my trackers on
en	I have all my trackers on

en-us	I have read the requirements
en	I have read the requirements

en-us	I know what I'm doing
en	I know what I'm doing

en-us	I'm having trouble connecting!
en	I'm having trouble connecting!

en-us	Imported
en	Imported

en-us	Import proportions
en	Import proportions

en-us	Impute hip from chest to legs
en	Impute hip from chest to legs

en-us	Impute hip from waist to legs
en	Impute hip from waist to legs

en-us	Impute waist from chest to hip
en	Impute waist from chest to hip

en-us	Impute waist from chest to legs
en	Impute waist from chest to legs

en-us	I'm ready
en	I'm ready

en-us	I'm standing!
en	I'm standing!

en-us	I'm sure of what I'm doing
en	I'm sure of what I'm doing

en-us	IMU Calibration Tutorial
en	IMU Calibration Tutorial

en-us	IMU Sensor
en	IMU Sensor

en-us	Increase this value if tap detection is not working. Do not increase it above what is needed to make tap detection work as it would cause more false positives.
en	Increase this value if tap detection is not working. Do not increase it above what is needed to make tap detection work as it would cause more false positives.

en-us	Input Wi-Fi credentials
en	Input Wi-Fi credentials

en-us	Interface
en	Interface

en-us	Interface
en	Interface

en-us	I placed my trackers on the table
en	I placed my trackers on the table

en-us	I put stickers and straps!
en	I put stickers and straps!

en-us	IPV4 address
en	IPV4 address

en-us	IPV4 address
en	IPV4 address

en-us	It is recommended to perform a full reset as one or more trackers are unadjusted.
en	It is recommended to perform a full reset as one or more trackers are unadjusted.

en-us	I understand the risks
en	I understand the risks

en-us	Knees
en	Knees

en-us	Knees
en	Knees

en-us	Left
en	Left

en-us	Left ankle
en	Left ankle

en-us	Left ankle is assigned but you need Unknown unassigned body part to also be assigned!
en	Left ankle is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Left controller
en	Left controller

en-us	Left elbow
en	Left elbow

en-us	Left foot
en	Left foot

en-us	Left foot
en	Left foot

en-us	Left foot is assigned but you need Unknown unassigned body part to also be assigned!
en	Left foot is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Left hand
en	Left hand

en-us	Left hand
en	Left hand

en-us	Left knee
en	Left knee

en-us	Left lower arm
en	Left lower arm

en-us	Left shoulder
en	Left shoulder

en-us	Left thigh
en	Left thigh

en-us	Left thigh is assigned but you need Unknown unassigned body part to also be assigned!
en	Left thigh is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Left upper arm
en	Left upper arm

en-us	Leg length
en	Leg length

en-us	Leg tracking
en	Leg tracking

en-us	Leg tweaks
en	Leg tweaks

en-us	Let's choose which tracker goes where. Click on a location where you want to place a tracker
en	Let's choose which tracker goes where. Click on a location where you want to place a tracker

en-us	Let's get set up!
en	Let's get set up!

en-us	Lets you close the window without closing the SlimeVR Server so you can continue using it without having the GUI bothering you.
en	Lets you close the window without closing the SlimeVR Server so you can continue using it without having the GUI bothering you.

en-us	Load a VRM model to allow head anchor and enable a higher compatibility with other applications.
en	Load a VRM model to allow head anchor and enable a higher compatibility with other applications.

en-us	Looking for server
en	Looking for server

en-us	Looking for trackers
en	Looking for trackers

en-us	Looking for trackers
en	Looking for trackers

en-us	Lower Arm Length
en	Lower Arm Length

en-us	Lower Leg Length
en	Lower Leg Length

en-us	Main board
en	Main board

en-us	Make the moves shown below:
en	Make the moves shown below:

en-us	Manage all trackers
en	Manage all trackers

en-us	Manual Body Proportions
en	Manual Body Proportions

en-us	Manual mounting
en	Manual mounting

en-us	Manual mounting
en	Manual mounting

en-us	Manual Mounting
en	Manual Mounting

en-us	Manual proportions
en	Manual proportions

en-us	Manual proportions
en	Manual proportions

en-us	Manufacturer
en	Manufacturer

en-us	Measure your body
en	Measure your body

en-us	Minimize to system tray
en	Minimize to system tray

en-us	Minimize to system tray
en	Minimize to system tray

en-us	Minimize to system tray
en	Minimize to system tray

en-us	Mirror view
en	Mirror view

en-us	Mocap mode
en	Mocap mode

en-us	Mocap Mode allows the skeleton to roughly track its own position without a headset or other trackers. Note that this requires feet and head trackers to work and is still experimental.
en	Mocap Mode allows the skeleton to roughly track its own position without a headset or other trackers. Note that this requires feet and head trackers to work and is still experimental.

en-us	More info
en	More info

en-us	Mounting Calibration
en	Mounting Calibration

en-us	Mounting Calibration
en	Mounting Calibration

en-us	Mounting orientation
en	Mounting orientation

en-us	Mounting orientation corrects for the placement of trackers on your body.
en	Mounting orientation corrects for the placement of trackers on your body.

en-us	Mounting orientations calibrated.
en	Mounting orientations calibrated.

en-us	Mounting Reset
en	Mounting Reset

en-us	Mounting reset delay
en	Mounting reset delay

en-us	Name
en	Name

en-us	Neck
en	Neck

en-us	Neck Length
en	Neck Length

en-us	Network address
en	Network address

en-us	Network address
en	Network address

en-us	Network address
en	Network address

en-us	Network ports
en	Network ports

en-us	Network ports
en	Network ports

en-us	Network ports
en	Network ports

en-us	New serial device detected!
en	New serial device detected!

en-us	New version available: { $version }
en	New version available: { $version }

en-us	Next step
en	Next step

en-us	Next step
en	Next step

en-us	Nice!
en	Nice!

en-us	NightyBeast's left leg
en	NightyBeast's left leg

en-us	No filtering
en	No filtering

en-us	No model loaded
en	No model loaded

en-us	No name
en	No name

en-us	None
en	None

en-us	No Status
en	No Status

en-us	Notifications
en	Notifications

en-us	Notifications
en	Notifications

en-us	No trackers detected or assigned
en	No trackers detected or assigned

en-us	Not sure which tracker is which? Shake a tracker and it will highlight the corresponding item.
en	Not sure which tracker is which? Shake a tracker and it will highlight the corresponding item.

en-us	Now onto the fun part, connecting all the trackers!
en	Now onto the fun part, connecting all the trackers!

en-us	Now onto the fun part, connecting trackers!
en	Now onto the fun part, connecting trackers!

en-us	Occluded
en	Occluded

en-us	OK
en	OK

en-us	One or more trackers are still on. Do you still want to exit SlimeVR?
en	One or more trackers are still on. Do you still want to exit SlimeVR?

en-us	Open Serial Console
en	Open Serial Console

en-us	OSC router
en	OSC router

en-us	OSC router
en	OSC router

en-us	OS font
en	OS font

en-us	Overlay
en	Overlay

en-us	(overriden by mounting reset)
en	(overriden by mounting reset)

en-us	Password
en	Password

en-us	Pause tracking
en	Pause tracking

en-us	Ping
en	Ping

en-us	Place a chair directly behind you inside your play space. Be prepared to sit down during the autobone setup.
en	Place a chair directly behind you inside your play space. Be prepared to sit down during the autobone setup.

en-us	Please press the button while standing <u>upright</u> to calculate your height. You have 3 seconds after you press the button!
en	Please press the button while standing <u>upright</u> to calculate your height. You have 3 seconds after you press the button!

en-us	Please select what you want to do with it
en	Please select what you want to do with it

en-us	Port In
en	Port In

en-us	Port In
en	Port In

en-us	Port In
en	Port In

en-us	Port Out
en	Port Out

en-us	Port Out
en	Port Out

en-us	Port Out
en	Port Out

en-us	Position X/Y/Z
en	Position X/Y/Z

en-us	Precise rotation
en	Precise rotation

en-us	Precision adjust
en	Precision adjust

en-us	Prediction
en	Prediction

en-us	Preparation
en	Preparation

en-us	Preparation
en	Preparation

en-us	Preview
en	Preview

en-us	Previous step
en	Previous step

en-us	Previous step
en	Previous step

en-us	Previous step
en	Previous step

en-us	Processing the result
en	Processing the result

en-us	Processing the result
en	Processing the result

en-us	Protocol Version
en	Protocol Version

en-us	Put on all your trackers and then enter VR!
en	Put on all your trackers and then enter VR!

en-us	Put on your trackers
en	Put on your trackers

en-us	Put on your trackers
en	Put on your trackers

en-us	Quick Reset
en	Quick Reset

en-us	Quick reset delay
en	Quick reset delay

en-us	Quit
en	Quit

en-us	Raw
en	Raw

en-us	Raw rotation
en	Raw rotation

en-us	Reboot
en	Reboot

en-us	REC
en	REC

en-us	Recommended
en	Recommended

en-us	Recommended
en	Recommended

en-us	Recommended
en	Recommended

en-us	Record BVH
en	Record BVH

en-us	Recording...
en	Recording...

en-us	Recording in progress...
en	Recording in progress...

en-us	Recording results
en	Recording results

en-us	Redo recording
en	Redo recording

en-us	Reduces latency and makes movements more snappy, but may increase jitter.
en	Reduces latency and makes movements more snappy, but may increase jitter.

en-us	Removes the tracker from the SlimeVR Server and prevent it from connecting to it until the server is restarted. The configuration of the tracker won't be lost.
en	Removes the tracker from the SlimeVR Server and prevent it from connecting to it until the server is restarted. The configuration of the tracker won't be lost.

en-us	Requirements
en	Requirements

en-us	Reset all proportions
en	Reset all proportions

en-us	Reset delay
en	Reset delay

en-us	Reset Mounting
en	Reset Mounting

en-us	Reset tutorial
en	Reset tutorial

en-us	Right
en	Right

en-us	Right ankle
en	Right ankle

en-us	Right ankle is assigned but you need Unknown unassigned body part to also be assigned!
en	Right ankle is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Right controller
en	Right controller

en-us	Right elbow
en	Right elbow

en-us	Right foot
en	Right foot

en-us	Right foot
en	Right foot

en-us	Right foot is assigned but you need Unknown unassigned body part to also be assigned!
en	Right foot is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Right hand
en	Right hand

en-us	Right hand
en	Right hand

en-us	Right knee
en	Right knee

en-us	Right lower arm
en	Right lower arm

en-us	Right shoulder
en	Right shoulder

en-us	Right thigh
en	Right thigh

en-us	Right thigh is assigned but you need Unknown unassigned body part to also be assigned!
en	Right thigh is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Right upper arm
en	Right upper arm

en-us	Rotation
en	Rotation

en-us	Rotation X/Y/Z
en	Rotation X/Y/Z

en-us	Save
en	Save

en-us	Save automatic mounting reset calibration
en	Save automatic mounting reset calibration

en-us	Save mounting reset
en	Save mounting reset

en-us	Saves the automatic mounting reset calibrations for the trackers between restarts. Useful when wearing a suit where trackers don't move between sessions. <b>Not recommended for normal users!</b>
en	Saves the automatic mounting reset calibrations for the trackers between restarts. Useful when wearing a suit where trackers don't move between sessions. <b>Not recommended for normal users!</b>

en-us	Select a serial port
en	Select a serial port

en-us	Select language
en	Select language

en-us	Select the language to use
en	Select the language to use

en-us	Sending Wi-Fi credentials
en	Sending Wi-Fi credentials

en-us	Serial console
en	Serial console

en-us	Serial Console
en	Serial Console

en-us	Serial device detection
en	Serial device detection

en-us	Serial device detection
en	Serial device detection

en-us	Set the address to send out data at.
en	Set the address to send out data at.

en-us	Set the ports for listening and sending data. These can be the same as other ports used in the SlimeVR server.
en	Set the ports for listening and sending data. These can be the same as other ports used in the SlimeVR server.

en-us	Set the ports for listening and sending data to VRChat.
en	Set the ports for listening and sending data to VRChat.

en-us	Set the ports for listening and sending data via VMC.
en	Set the ports for listening and sending data via VMC.

en-us	Settings
en	Settings

en-us	Settings
en	Settings

en-us	Setup Wizard
en	Setup Wizard

en-us	Shoulders Distance
en	Shoulders Distance

en-us	Shoulders Width
en	Shoulders Width

en-us	Should this tracker compensate for its drift when drift compensation is enabled?
en	Should this tracker compensate for its drift when drift compensation is enabled?

en-us	Show
en	Show

en-us	Show advanced assign locations
en	Show advanced assign locations

en-us	Show advanced assign locations
en	Show advanced assign locations

en-us	Show Overlay in SteamVR
en	Show Overlay in SteamVR

en-us	Simply connect all that aren't connected yet, through a USB port.
en	Simply connect all that aren't connected yet, through a USB port.

en-us	Sit on a chair then stand up.
en	Sit on a chair then stand up.

en-us	Skating correction
en	Skating correction

en-us	Skating-correction corrects for ice skating but can decrease accuracy in certain movement patterns. When enabling this make sure to full reset and recalibrate in game.
en	Skating-correction corrects for ice skating but can decrease accuracy in certain movement patterns. When enabling this make sure to full reset and recalibrate in game.

en-us	Skating correction strength
en	Skating correction strength

en-us	Skeleton Offset
en	Skeleton Offset

en-us	Skeleton preview
en	Skeleton preview

en-us	Skeleton ratios
en	Skeleton ratios

en-us	Skeleton settings
en	Skeleton settings

en-us	Skeleton toggles
en	Skeleton toggles

en-us	Skip setup
en	Skip setup

en-us	Skip setup
en	Skip setup

en-us	Skip step
en	Skip step

en-us	Skip Wi-Fi settings
en	Skip Wi-Fi settings

en-us	Smoothing
en	Smoothing

en-us	Smooths movements but adds some latency.
en	Smooths movements but adds some latency.

en-us	Sort by name
en	Sort by name

en-us	so your actual height is
en	so your actual height is

en-us	Standing up straight, roll your head in a circle. Bend your back forwards and squat. While squatting, look to your left, then to your right. Twist your upper body to the left (counter-clockwise), then reach down towards the ground. Twist your upper body to the right (clockwise), then reach down towards the ground. Roll your hips in a circular motion as if you're using a hula hoop. If there is time left on the recording, you can repeat these steps until it's finished.
en	Standing up straight, roll your head in a circle. Bend your back forwards and squat. While squatting, look to your left, then to your right. Twist your upper body to the left (counter-clockwise), then reach down towards the ground. Twist your upper body to the right (clockwise), then reach down towards the ground. Roll your hips in a circular motion as if you're using a hula hoop. If there is time left on the recording, you can repeat these steps until it's finished.

en-us	Start Recording
en	Start Recording

en-us	SteamVR
en	SteamVR

en-us	SteamVR trackers
en	SteamVR trackers

en-us	Sticker
en	Sticker

en-us	Submit!
en	Submit!

en-us	Submit!
en	Submit!

en-us	Sure!
en	Sure!

en-us	Tap { $taps } times the highlighted tracker for triggering full reset.  You need to be standing for this (i-pose). There is a 3 seconds delay (configurable) before it actually happens. This fully resets the position and rotation of all your trackers. It should fix most issues.
en	Tap { $taps } times the highlighted tracker for triggering full reset.  You need to be standing for this (i-pose). There is a 3 seconds delay (configurable) before it actually happens. This fully resets the position and rotation of all your trackers. It should fix most issues.

en-us	Tap { $taps } times the highlighted tracker for triggering mounting reset.  Mounting reset helps on how the trackers are actually put on you, so if you accidentally moved them and changed how they are oriented by a big amount, this will help.  You need to be on a pose like you are skiing like it's shown on the Automatic Mounting wizard and you have a 3 second delay (configurable) before it gets triggered.
en	Tap { $taps } times the highlighted tracker for triggering mounting reset.  Mounting reset helps on how the trackers are actually put on you, so if you accidentally moved them and changed how they are oriented by a big amount, this will help.  You need to be on a pose like you are skiing like it's shown on the Automatic Mounting wizard and you have a 3 second delay (configurable) before it gets triggered.

en-us	Tap { $taps } times the highlighted tracker for triggering yaw reset.  This will make the trackers face the same direction as your headset (HMD).
en	Tap { $taps } times the highlighted tracker for triggering yaw reset.  This will make the trackers face the same direction as your headset (HMD).

en-us	Tap based resets
en	Tap based resets

en-us	Taps for full reset
en	Taps for full reset

en-us	Taps for mounting reset
en	Taps for mounting reset

en-us	Taps for quick reset
en	Taps for quick reset

en-us	Taps for reset
en	Taps for reset

en-us	Taps for yaw reset
en	Taps for yaw reset

en-us	Temp. °C
en	Temp. °C

en-us	The { $trackerName } tracker has an error.
en	The { $trackerName } tracker has an error.

en-us	The default mode, with the upper arms going back and lower arms going forward.
en	The default mode, with the upper arms going back and lower arms going forward.

en-us	The hook and loop side for the extension should be in this orientation:
en	The hook and loop side for the extension should be in this orientation:

en-us	There is a new tracker with MAC address <b>{ $deviceId }</b>. Do you want to connect it to SlimeVR?
en	There is a new tracker with MAC address <b>{ $deviceId }</b>. Do you want to connect it to SlimeVR?

en-us	The Trackers will use these credentials to connect wirelessly. Please use the credentials that you are currently connected to.
en	The Trackers will use these credentials to connect wirelessly. Please use the credentials that you are currently connected to.

en-us	The tracker was moved
en	The tracker was moved

en-us	The velcro side for the extension should be facing up like the following image:
en	The velcro side for the extension should be facing up like the following image:

en-us	They are fine
en	They are fine

en-us	They're correct
en	They're correct

en-us	This affects the font size of the whole interface except this settings panel.
en	This affects the font size of the whole interface except this settings panel.

en-us	This changes the font used by the interface.
en	This changes the font used by the interface.

en-us	This is a live information feed for serial communication. May be useful if you need to know the firmware is acting up.
en	This is a live information feed for serial communication. May be useful if you need to know the firmware is acting up.

en-us	This lets you choose whether you want to exit the server or to minimize it to the tray when pressing the close button.  You can change this later in the interface settings!
en	This lets you choose whether you want to exit the server or to minimize it to the tray when pressing the close button.  You can change this later in the interface settings!

en-us	This mode can be useful if you need in-depth data or to interact with connected trackers on a more advanced level.
en	This mode can be useful if you need in-depth data or to interact with connected trackers on a more advanced level.

en-us	This option will play a sound when a reset is triggered.
en	This option will play a sound when a reset is triggered.

en-us	This option will show a pop-up every time you plug a new serial device that could be a tracker. It helps improving the setup process of a tracker.
en	This option will show a pop-up every time you plug a new serial device that could be a tracker. It helps improving the setup process of a tracker.

en-us	This option will show a pop-up every time you try exiting SlimeVR while having one or more connected trackers. It reminds you to turn off your trackers when you are done to preserve battery life.
en	This option will show a pop-up every time you try exiting SlimeVR while having one or more connected trackers. It reminds you to turn off your trackers when you are done to preserve battery life.

en-us	This will automatically detect the mounting orientations for all of your trackers from 2 poses
en	This will automatically detect the mounting orientations for all of your trackers from 2 poses

en-us	This will guess your proportions by recording a sample of your movements and passing it through an algorithm
en	This will guess your proportions by recording a sample of your movements and passing it through an algorithm

en-us	This will guess your proportions by recording a sample of your movements and passing it through an algorithm.  <b>This requires having your headset (HMD) connected to SlimeVR and on your head!</b>
en	This will guess your proportions by recording a sample of your movements and passing it through an algorithm.  <b>This requires having your headset (HMD) connected to SlimeVR and on your head!</b>

en-us	This will guess your proportions by recording a sample of your movements and passing it through an algorithm.  <b>This requires having your HMD connected to SlimeVR!</b>
en	This will guess your proportions by recording a sample of your movements and passing it through an algorithm.  <b>This requires having your HMD connected to SlimeVR!</b>

en-us	This will help reduce tracker drifting!
en	This will help reduce tracker drifting!

en-us	This will let you adjust your proportions manually by modifying them directly
en	This will let you adjust your proportions manually by modifying them directly

en-us	This will let you choose the mounting orientation manually for each tracker
en	This will let you choose the mounting orientation manually for each tracker

en-us	Timed out
en	Timed out

en-us	Time to enter VR!
en	Time to enter VR!

en-us	To calibrate mounting orientations, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
en	To calibrate mounting orientations, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.

en-us	To calibrate your proportions, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
en	To calibrate your proportions, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.

en-us	Toe snap
en	Toe snap

en-us	Toe-snap attempts to guess the rotation of your feet if feet trackers are not in use.
en	Toe-snap attempts to guess the rotation of your feet if feet trackers are not in use.

en-us	Toggle skeleton settings on or off. It is recommended to leave these on.
en	Toggle skeleton settings on or off. It is recommended to leave these on.

en-us	Toggle the forwarding of messages.
en	Toggle the forwarding of messages.

en-us	Toggle the sending and receiving of data.
en	Toggle the sending and receiving of data.

en-us	Toggle the sending and receiving of data.
en	Toggle the sending and receiving of data.

en-us	Toggle the sending of specific trackers via OSC.
en	Toggle the sending of specific trackers via OSC.

en-us	Torso length
en	Torso length

en-us	T-pose (down)
en	T-pose (down)

en-us	T-pose (up)
en	T-pose (up)

en-us	TPS
en	TPS

en-us	Tracker Assignment
en	Tracker Assignment

en-us	Tracker mechanics
en	Tracker mechanics

en-us	Tracker mechanics
en	Tracker mechanics

en-us	Tracker name
en	Tracker name

en-us	Trackers
en	Trackers

en-us	{ -tracker_selection-part } chest?
en	{ -tracker_selection-part } chest?

en-us	{ -tracker_selection-part } head?
en	{ -tracker_selection-part } head?

en-us	{ -tracker_selection-part } hip?
en	{ -tracker_selection-part } hip?

en-us	{ -tracker_selection-part } left ankle?
en	{ -tracker_selection-part } left ankle?

en-us	{ -tracker_selection-part } left controller?
en	{ -tracker_selection-part } left controller?

en-us	{ -tracker_selection-part } left foot?
en	{ -tracker_selection-part } left foot?

en-us	{ -tracker_selection-part } left hand?
en	{ -tracker_selection-part } left hand?

en-us	{ -tracker_selection-part } left lower arm?
en	{ -tracker_selection-part } left lower arm?

en-us	{ -tracker_selection-part } left shoulder?
en	{ -tracker_selection-part } left shoulder?

en-us	{ -tracker_selection-part } left thigh?
en	{ -tracker_selection-part } left thigh?

en-us	{ -tracker_selection-part } left upper arm?
en	{ -tracker_selection-part } left upper arm?

en-us	{ -tracker_selection-part } neck?
en	{ -tracker_selection-part } neck?

en-us	{ -tracker_selection-part } right ankle?
en	{ -tracker_selection-part } right ankle?

en-us	{ -tracker_selection-part } right controller?
en	{ -tracker_selection-part } right controller?

en-us	{ -tracker_selection-part } right foot?
en	{ -tracker_selection-part } right foot?

en-us	{ -tracker_selection-part } right hand?
en	{ -tracker_selection-part } right hand?

en-us	{ -tracker_selection-part } right lower arm?
en	{ -tracker_selection-part } right lower arm?

en-us	{ -tracker_selection-part } right shoulder?
en	{ -tracker_selection-part } right shoulder?

en-us	{ -tracker_selection-part } right thigh?
en	{ -tracker_selection-part } right thigh?

en-us	{ -tracker_selection-part } right upper arm?
en	{ -tracker_selection-part } right upper arm?

en-us	{ -tracker_selection-part } upper chest?
en	{ -tracker_selection-part } upper chest?

en-us	{ -tracker_selection-part } waist?
en	{ -tracker_selection-part } waist?

en-us	Tracker settings
en	Tracker settings

en-us	Trackers over threshold
en	Trackers over threshold

en-us	Trackers still on
en	Trackers still on

en-us	Tracker URL
en	Tracker URL

en-us	Tracking settings
en	Tracking settings

en-us	Tracking settings
en	Tracking settings

en-us	Try again
en	Try again

en-us	Trying to connect to Wi-Fi
en	Trying to connect to Wi-Fi

en-us	Twist upper body left, then bend right.
en	Twist upper body left, then bend right.

en-us	Twist upper body right, then bend left.
en	Twist upper body right, then bend left.

en-us	Type
en	Type

en-us	Unable to connect to Wi-Fi
en	Unable to connect to Wi-Fi

en-us	Unable to connect to Wi-Fi
en	Unable to connect to Wi-Fi

en-us	Unassign
en	Unassign

en-us	Unassigned
en	Unassigned

en-us	Unassigned
en	Unassigned

en-us	Unassigned Trackers
en	Unassigned Trackers

en-us	Unassign tracker
en	Unassign tracker

en-us	Understood!
en	Understood!

en-us	Unknown
en	Unknown

en-us	Unpause tracking
en	Unpause tracking

en-us	Untitled model loaded
en	Untitled model loaded

en-us	Update
en	Update

en-us	Upper Arm Length
en	Upper Arm Length

en-us	Upper chest
en	Upper chest

en-us	Upper Chest Length
en	Upper Chest Length

en-us	Upper Leg Length
en	Upper Leg Length

en-us	URL
en	URL

en-us	USB Tracker
en	USB Tracker

en-us	Use rotations as is. Will not do any filtering.
en	Use rotations as is. Will not do any filtering.

en-us	Use up to x last resets
en	Use up to x last resets

en-us	Using official SlimeVR trackers? Remember to <b><em>turn on your tracker</em></b> after connecting it to the PC!
en	Using official SlimeVR trackers? Remember to <b><em>turn on your tracker</em></b> after connecting it to the PC!

en-us	Utilities
en	Utilities

en-us	Verify results
en	Verify results

en-us	Virtual Motion Capture
en	Virtual Motion Capture

en-us	Vive emulation
en	Vive emulation

en-us	VRChat ip address
en	VRChat ip address

en-us	VRChat OSC Trackers
en	VRChat OSC Trackers

en-us	VRChat OSC Trackers
en	VRChat OSC Trackers

en-us	VRM Model
en	VRM Model

en-us	Waist
en	Waist

en-us	Waist
en	Waist

en-us	Waist
en	Waist

en-us	Waist is assigned but you need Unknown unassigned body part to also be assigned!
en	Waist is assigned but you need Unknown unassigned body part to also be assigned!

en-us	Waist Length
en	Waist Length

en-us	Waiting for you
en	Waiting for you

en-us	Welcome to SlimeVR
en	Welcome to SlimeVR

en-us	We're now going to record some specific poses and moves. These will be prompted in the next screen. Be ready to start when the button is pressed!
en	We're now going to record some specific poses and moves. These will be prompted in the next screen. Be ready to start when the button is pressed!

en-us	We use your height as a basis of our measurements by using the headset's (HMD) height as an approximation of your actual height, but it's better to check if they are right yourself!
en	We use your height as a basis of our measurements by using the headset's (HMD) height as an approximation of your actual height, but it's better to check if they are right yourself!

en-us	What mounting calibration method to use?
en	What mounting calibration method to use?

en-us	What part of the body the tracker is assigned to.
en	What part of the body the tracker is assigned to.

en-us	What proportion calibration method to use?
en	What proportion calibration method to use?

en-us	What should the close button do?
en	What should the close button do?

en-us	Where do you want this tracker to be?
en	Where do you want this tracker to be?

en-us	Where do you want this tracker to be?
en	Where do you want this tracker to be?

en-us	Where is the tracker mounted?
en	Where is the tracker mounted?

en-us	Which tracker do you want to be unassigned?
en	Which tracker do you want to be unassigned?

en-us	Which tracker to assign to your
en	Which tracker to assign to your

en-us	While you use your trackers they might get out of alignment because of IMU yaw drift, or because you might have moved them physically. You have several ways to fix this.
en	While you use your trackers they might get out of alignment because of IMU yaw drift, or because you might have moved them physically. You have several ways to fix this.

en-us	While you use your trackers they might get out of alignment because of IMU yaw drift, or because you might have moved them physically. You have several ways to fix this.
en	While you use your trackers they might get out of alignment because of IMU yaw drift, or because you might have moved them physically. You have several ways to fix this.

en-us	Wi-Fi name
en	Wi-Fi name

en-us	Wiggle around until timer ends.
en	Wiggle around until timer ends.

en-us	Work in progress
en	Work in progress

en-us	Yaw Reset
en	Yaw Reset

en-us	Yaw reset delay
en	Yaw reset delay

en-us	Yaw reset smooth time (0s disables smoothing)
en	Yaw reset smooth time (0s disables smoothing)

en-us	Yes
en	Yes

en-us	You can slowly tap 2 times your tracker to choose it instead of selecting it from the menu.
en	You can slowly tap 2 times your tracker to choose it instead of selecting it from the menu.

en-us	You have at least enough trackers to track your feet (generally 5 trackers). You have your trackers and headset on and are wearing them. Your trackers and headset are connected to the SlimeVR server and are working properly (ex. no stuttering, disconnecting, etc). Your headset is reporting positional data to the SlimeVR server (this generally means having SteamVR running and connected to SlimeVR using SlimeVR's SteamVR driver). Your tracking is working and is accurately representing your movements (ex. you have performed a full reset and they move the right direction when kicking, bending over, sitting, etc).
en	You have at least enough trackers to track your feet (generally 5 trackers). You have your trackers and headset on and are wearing them. Your trackers and headset are connected to the SlimeVR server and are working properly (ex. no stuttering, disconnecting, etc). Your headset is reporting positional data to the SlimeVR server (this generally means having SteamVR running and connected to SlimeVR using SlimeVR's SteamVR driver). Your tracking is working and is accurately representing your movements (ex. you have performed a full reset and they move the right direction when kicking, bending over, sitting, etc).

en-us	You have at least enough trackers to track your feet (generally 5 trackers). You have your trackers and headset on. You are wearing your trackers and headset. Your trackers and headset are connected to the SlimeVR server. Your trackers and headset are working properly within the SlimeVR server. Your headset is reporting positional data to the SlimeVR server (this generally means having SteamVR running and connected to SlimeVR using SlimeVR's SteamVR driver).
en	You have at least enough trackers to track your feet (generally 5 trackers). You have your trackers and headset on. You are wearing your trackers and headset. Your trackers and headset are connected to the SlimeVR server. Your trackers and headset are working properly within the SlimeVR server. Your headset is reporting positional data to the SlimeVR server (this generally means having SteamVR running and connected to SlimeVR using SlimeVR's SteamVR driver).

en-us	Your body proportions' calibration is complete!
en	Your body proportions' calibration is complete!

en-us	You're all set!
en	You're all set!

en-us	Your height is
en	Your height is

en-us	Your HMD height is
en	Your HMD height is

en-us	Your mounting calibration is complete!
en	Your mounting calibration is complete!